Basin scale assessment of landslides geomorphological setting by advanced InSAR analysis

An extensive investigation of more than 90 landslides affecting a small river basin in Central Italy was performed by combining field surveys and remote sensing techniques. We thus defined the geomorphological setting of slope instability processes. Basic information, such as landslides mapping and landslides type definition, have been acquired thanks to geomorphological field investigations and multi-temporal aerial photos interpretation, while satellite SAR archive data (acquired by ERS and Envisat from 1992 to 2010) have been analyzed by means of A-DInSAR (Advanced Differential Interferometric Synthetic Aperture Radar) techniques to evaluate landslides past displacements patterns. Multi-temporal assessment of landslides state of activity has been performed basing on geomorphological evidence criteria and past ground displacement measurements obtained by A-DInSAR. This step has been performed by means of an activity matrix derived from information achieved thanks to double orbital geometry. Thanks to this approach we also achieved more detailed knowledge about the landslides kinematics in time and space

Deformations of Highway over Undermined Ostrava-Svinov Area Monitored by InSAR Using Limited Set of SAR Images

AbstractPart of Czech highway D1 connecting Ostrava city with Prague and Poland, is built over an undermined area of Ostrava-Svinov, with mines closed since 1991 in the area. Soon after its opening ceremony in 2008, the highway began to exhibit various significant deformations. An attempt of InSAR monitoring using ERS, Envisat and several TerraSAR-X Spotlight acquisitions was done in order to monitor progress of deformations, to consider suitability of satellite InSAR for such purposes and to search for footprints whether the deformations were caused by fading subsidence due to undermining or by another, local, reason. Only shallow subsidence was found in the area from Envisat data ranging 2005-2010. Highway deformations in late 2011 are observable from processing of limited set of 5 TerraSAR-X images using different methods. Detected deformations are very probably due to longitudinal thermal expansion of the observed highway bridge. This publication contains issues to be taken into consideration for appropriate interpretation and processing if the available input dataset is limited and not optimal

INSAR X-BAND ATMOSPHERIC WATER VAPOR ANALYSIS AND COMPARISON IN HONG KONG

ABSTRACT The persistent scatterers (PS) technique is a powerful remote sensing technology that exploits a long series of synthetic aperture radar data for monitoring ground deformations with millimeter accuracy on a high spatial density of ground targets. One of the major limitations of this technique is due to atmospheric effects, and in particular to high Water Vapor (WV) variability. As a consequence, to successfully apply interferometric techniques, the atmospheric WV delay must be estimated and removed. On the contrary, PS technique could also be used to study high-resolution spatial-temporal water vapor characteristics. In this work, we investigate the atmosphere effects with a series of high-resolution TerraSAR-X (TSX) data and PS technique in Hong Kong. We will present some of the preliminary results as well as the discussions over the stratification and turbulence estimation

Structural health monitoring of engineered structures using a space-borne synthetic aperture radar multi-temporal approach: from cultural heritage sites to war zones

Structural health monitoring (SHM) of engineered structures consists of an automated or semi-automated survey system that seeks to assess the structural condition of an anthropogenic structure. The aim of an SHM system is to provide insights into possible induced damage or any inherent signals of deformation affecting the structure in terms of detection, localization, assessment, and prediction. During the last decade there has been a growing interest in using several remote sensing techniques, such as synthetic aperture radar (SAR), for SHM. Constellations of SAR satellites with short repeat time acquisitions permit detailed surveys temporal resolution and millimetric sensitivity to deformation that are at the scales relevant to monitoring large structures. The all-weather multi-temporal characteristics of SAR make its products suitable for SHM systems, especially in areas where in situ measurements are not feasible or not cost effective. To illustrate this capability, we present results from COSMO-SkyMed (CSK) and TerraSAR-X SAR observations applied to the remote sensing of engineered structures. We show how by using multiple-geometry SAR-based products which exploit both phase and amplitude of the SAR signal we can address the main objectives of an SHM system including detection and localization. We highlight that, when external data such as rain or temperature records are available or simple elastic models can be assumed, the SAR-based SHM capability can also provide an interpretation in terms of assessment and prediction. We highlight examples of the potential for such imaging capabilities to enable advances in SHM from space, focusing on dams and cultural heritage areas. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

Monitorización de infraestructuras críticas expuestas a riesgos naturales y antrópicos mediante interferometría radar de satélite

[EN] Synthetic Aperture Radar Interferometry (InSAR) is a remote sensing technique very effective for the measure of smalldisplacements of the Earth’s surface over large areas at a very low cost as compared with conventional geodetictechniques. Advanced InSAR time series algorithms for monitoring and investigating surface displacement on Earth arebased on conventional radar interferometry. These techniques allow us to measure deformation with uncertainties of 1mm/year, interpreting time series of interferometric phases at coherent point scatterers (PS) without the need for humanor special equipment presence on the site. By applying InSAR processing techniques to a series of radar images over thesame region, it is possible to detect line-of-sight (LOS) displacements of infrastructures on the ground and therefore identifyabnormal or excessive movement indicating potential problems requiring detailed ground investigation. A major advantageof this technology is that a single radar image can cover a major area of up to 100 km by 100 km or more as, for example,Sentinel-1 C-band satellites data cover a 250 km wide swath. Therefore, all engineering infrastructures in the area, suchas dams, dikes, bridges, ports, etc. subject to terrain deformation by volcanos, landslides, subsidence due to groundwater,gas, or oil withdrawal could be monitored, reducing operating costs effectively. In this sense, the free and open accessCopernicus Sentinel-1 data with currently up to 6-days revisit time open new opportunities for a near real-time landmonitoring. In addition, the new generation of high-resolution radar imagery acquired by SAR sensors such as TerraSARX,COSMO-SkyMed, and PAZ, and the development of multi-interferogram techniques has enhanced our capabilities inrecent years in using InSAR as deformation monitoring tool. In this paper, we address the applicability of using spaceborneSAR sensors for monitoring infrastructures in geomatics engineering and present several cases studies carried out by ourgroup related to anthropogenic and natural hazards, as well as monitoring of critical infrastructures.[ES] La interferometría radar de apertura sintética (InSAR) es una técnica de teledetección muy eficaz para medir pequeños desplazamientos de la superficie terrestre en grandes áreas a un coste muy pequeño en comparación con las técnicas geodésicas convencionales. Los algoritmos avanzados de series temporales InSAR para monitorizar e investigar el desplazamiento de la superficie terrestre se basan en la interferometría radar convencional. Estas técnicas nos permiten medir la deformación con incertidumbres de un milímetro por año, interpretando series temporales de fases interferométricas en retrodispersores puntuales coherentes (PS) sin necesidad de presencia humana o de equipos especiales en el sitio. Al aplicar técnicas de procesamiento InSAR a una serie de imágenes radar de la misma región, es posible detectar desplazamientos de infraestructuras proyectados en la línea de vista del satélite (line-of-sight o LOS) y, por lo tanto, identificar movimientos anormales o excesivos que indiquen problemas potenciales que requieran una investigación detallada del terreno. Una de las principales ventajas de esta tecnología es que una sola imagen radar puede cubrir un área importante de hasta 100 km por 100 km o más, ya que, por ejemplo, los datos de los satélites de banda C Sentinel-1 cubren una franja de 250 km de ancho. Por lo tanto, todas las infraestructuras civiles de la zona, como presas, diques, puentes, puertos, etc., sujetas a deformaciones del terreno por actividad volcánica, deslizamientos de tierra, hundimientos por extracción de agua subterránea, gas o petróleo, podrían ser monitorizados, reduciendo los costes operativos de manera efectiva. En este sentido, los datos Sentinel-1 de Copernicus, de acceso abierto, con hasta 6 días de tiempo de revisión actual abren nuevas oportunidades para una monitorización terrestre casi en tiempo real. Además, la nueva generación de imágenes radar de alta resolución adquiridas por sensores SAR como TerraSAR-X, COSMOSkyMed y PAZ, y el desarrollo de técnicas multi-interferograma ha mejorado nuestras capacidades en los últimos años en el uso del InSAR como herramienta para el control de deformaciones. En este trabajo se aborda la aplicabilidad del uso de sensores SAR espaciales para la monitorización de infraestructuras civiles en ingeniería geomática y presentamos varios casos de estudio realizados por nuestro grupo relacionados con riesgos naturales y antrópicos, así como de monitorización de infraestructura crítica.ERS-1/2 and Envisat datasets were provided by the European Space Agency (ESA). Sentinel-1A/B data were freely provided by ESA through Copernicus Programme. Data have been processed by DORIS (TUDelft), StaMPS (Andy Hooper), SARPROZ (Copyright (c) 2009-2020 Daniele Perissin), and SNAP (ESA). The satellite orbits are from TUDelft and ESA, as well as from the ESA Quality Control Group of Sentinel-1. Research was supported by [ESA Research and Service Support] for providing hardware resources employed in this work; [Spanish Ministry of Economy, Industry and Competitiveness] under ReMoDams project ESP2017-89344-R (AEI/FEDER, UE); [University of Jaén (Spain)] under PAIUJA-2021/2022 and CEACTEMA; [Junta de Andalucía (Spain)] under RNM-282 research group; [ERDF through the Operational Programme for Competitiveness and Internationalisation - COMPETE 2020 Programme] within project «POCI-01-0145-FEDER006961»; [National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology)] as part of project UID/EEA/50014/2013; [The Ministry of Education, Youth and Sports from the National Programme of Sustainability (NPU II)] under project «IT4Innovations excellence in science - LQ1602» (Czech Republic); and [Slovak Grant Agency VEGA] under projects No. 2/0100/20Ruiz-Armenteros, A.; Delgado-Blasco, J.; Bakon, M.; Lazecky, M.; Marchamalo-Sacristán, M.; Lamas-Fernández, F.; Ruiz-Constán, A.... (2021). Monitoring critical infrastructure exposed to anthropogenic and natural hazards using satellite radar interferometry. En Proceedings 3rd Congress in Geomatics Engineering. Editorial Universitat Politècnica de València. 137-146. https://doi.org/10.4995/CiGeo2021.2021.12736OCS13714

Multi-sensor and multi-temporal approach in monitoring of deformation zone with permanent monitoring solution and management of environmental changes: A case study of Solotvyno salt mine, Ukraine

Salt deposits were a rich source of mineral resources in the past, and some are still mined today. However, salt mines, especially abandoned ones, pose a threat to populated areas, infrastructure and the natural environment. Solotvyno (Ukraine) is one of the most significantly affected areas, with a deformation zone where significant year-on-year subsidences occur. Mining activities have caused a disturbance of the balance in the mountain massif, and as a consequence, the mountains are being reshaped, and the land cover is deformed. Deformation zone of the historical salt mine Solotvyno (Ukraine), Tyachiv district of Zakarpattia region is situated on the right bank of the Tisza river in the border area with Romania in Central Europe. This paper deals with the multi-sensor monitoring of the active deformation zone over the Solotvyno salt mine using satellite radar data (Sentinel-1), optical satellite imagery (Pleiades, SPOT) and in-situ UAV photogrammetry. Since the area represents a significant geohazard from a hydrogeological (Tisza River) and civil security standpoints (infrastructure of the inhabited regions), the design of a high-precision monitoring system to monitor and evaluate current environmental changes is proposed. Multi-temporal InSAR analysis exposed steeper subsidence tendencies of >−2 cm in the central part of the monitored area. Optical satellite and UAV images confirmed the increase in water surface in sinkhole areas up to 28,500 m2 and proved the emergence of new sinkholes in the central part of the Solotvyno mine. The aim of this study is to describe the post-collapse deformation processes by Pleiades and SPOT multi-spectral sensors and Sentinel-1 satellite SAR sensors since the 2010 collapse in order to describe the trends of deformation due to undermining and propose a high-precision permanent monitoring system based on satellite radar interferometry (InSAR)

VALIDATION OF PS HEIGHT ESTIMATES BY MEANS OF PHOTOGRAMMETRY

The Permanent Scatterers (PS) technique is an operational tool in the context of spaceborne SAR interferometry for monitoring the displacement of radar targets with millimetric accuracy. Recently, the target localization capability of the PS technique has been subject of study and the possibility of generating DEM’s and DTM’s by means of the height of a sparse set of points has been evaluated. In this paper, for the first time the PS height estimate has been validated exploiting about 250.000 spot heights at street level derived from photogrammetric techniques in the urban area around Milan. The very high correlation between the two independent measures confirms the theoretical sub-metric accuracy of vertical positioning. A PS DTM has then been generated and compared to the spot heights together with the corresponding SRTM DEM, showing the very high improvement given by the PS technique to the freely available topographic data. The results have been obtained by processing about 300 ERS and Envisat images acquired from 2 descending tracks and an ascending one over Milan

Monitoring Ground Subsidence in Hong Kong via Spaceborne Radar: Experiments and Validation

The persistent scatterers interferometry (PSI) technique is gradually becoming known for its capability of providing up to millimeter accuracy of measurement on ground displacement. Nevertheless, there is still quite a good amount of doubt regarding its correctness or accuracy. In this paper, we carried out an experiment corroborating the capability of the PSI technique with the help of a traditional survey method in the urban area of Hong Kong, China. Seventy three TerraSAR-X (TSX) and TanDEM-X (TDX) images spanning over four years are used for the data process. There are three aims of this study. The first is to generate a displacement map of urban Hong Kong and to check for spots with possible ground movements. This information will be provided to the local surveyors so that they can check these specific locations. The second is to validate if the accuracy of the PSI technique can indeed reach the millimeter level in this real application scenario. For validating the accuracy of PSI, four corner reflectors (CR) were installed at a construction site on reclaimed land in Hong Kong. They were manually moved up or down by a few to tens of millimeters, and the value derived from the PSI analysis was compared to the true value. The experiment, carried out in unideal conditions, nevertheless proved undoubtedly that millimeter accuracy can be achieved by the PSI technique. The last is to evaluate the advantages and limitations of the PSI technique. Overall, the PSI technique can be extremely useful if used in collaboration with other techniques, so that the advantages can be highlighted and the drawbacks avoided